SUBARU impreza SERVICE and USER MANUAL

BRAKE

Sort by: default name
Stop Light Switch ADJUSTMENT Stop Light Switch ADJUSTMENT BRAKE > Stop Light Switch ADJUSTMENT 1. GASOLINE ENGINE MODEL CAUTION: • Turn the stop light switch clockwise when installing so that it can return backward by approximately 1 mm (0.04 in) and clearance is...
Stop Light Switch INSPECTION Stop Light Switch INSPECTION BRAKE > Stop Light Switch INSPECTION 1. CLEARANCE CHECK NOTE: Check for clearance is applied only to HEV model. 1. Measure the clearance between the end of the stop light switch and the stopper. Specification:...
Stop Light Switch INSTALLATION Stop Light Switch INSTALLATION BRAKE > Stop Light Switch INSTALLATION 1. GASOLINE ENGINE MODEL 1. Install the stop light switch. CAUTION: • Turn the stop light switch clockwise when installing so that it can return backward by...
Stop Light Switch REMOVAL Stop Light Switch REMOVAL BRAKE > Stop Light Switch REMOVAL 1. Disconnect the ground cable from battery. NOTE NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor....
Relay and Fuse INSPECTION Relay and Fuse INSPECTION BRAKE > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the fuse is blown again, check the system wiring harness. 2....
Relay and Fuse LOCATION Relay and Fuse LOCATION BRAKE > Relay and Fuse LOCATION Main fuse box Fuse 15 A (vacuum pump - relay) (A) Fuse 30 A (vacuum pump - relay) (B) NOTE: For other related fuses, refer to the wiring diagram. •...
Rear Disc Rotor INSPECTION Rear Disc Rotor INSPECTION BRAKE > Rear Disc Rotor INSPECTION 1. DISC ROTOR RUNOUT CHECK 1. Check the hub unit COMPL - rear axle for free play and runout before the inspection of disc rotor runout limit. Rear Hub Unit Bearing > INSPECTION...
Rear Disc Rotor INSTALLATION Rear Disc Rotor INSTALLATION BRAKE > Rear Disc Rotor INSTALLATION NOTE: Before installation, remove mud and foreign matter from the caliper body assembly. 1. Before installation, check the rear disc rotor. Rear Disc Rotor > INSPECTION 2....
Rear Disc Rotor REMOVAL Rear Disc Rotor REMOVAL BRAKE > Rear Disc Rotor REMOVAL 1. Lift up the vehicle, and then remove the rear wheels. 2. Release the lever assembly - hand brake. 3. Remove the caliper body assembly from the housing assembly - rear axle....
Rear Disc Brake Assembly DISASSEMBLY Rear Disc Brake Assembly DISASSEMBLY BRAKE > Rear Disc Brake Assembly DISASSEMBLY CAUTION: Be careful not to allow foreign matter to enter the brake hose connector. 1. Remove mud and foreign matter from the caliper body assembly. 2. Remove the...
Rear Disc Brake Assembly INSTALLATION Rear Disc Brake Assembly INSTALLATION BRAKE > Rear Disc Brake Assembly INSTALLATION NOTE: Before installation, remove mud and foreign matter from the caliper body assembly and support - rear disc brake. 1. Before installation, check each part. Rear Disc...
Rear Disc Brake Assembly ASSEMBLY Rear Disc Brake Assembly ASSEMBLY BRAKE > Rear Disc Brake Assembly ASSEMBLY 1. Before installation, check each part. Rear Disc Brake Assembly > INSPECTION 2. Clean the inside of the caliper body cylinder using brake fluid. 3. Apply a coat of...
Rear Disc Brake Assembly REMOVAL Rear Disc Brake Assembly REMOVAL BRAKE > Rear Disc Brake Assembly REMOVAL CAUTION: Do not allow brake fluid to come in contact with the painted surface of the vehicle body. If it does, wash off with water and wipe away completely. 1. Lift up the...
Rear Brake Pad INSPECTION Rear Brake Pad INSPECTION BRAKE > Rear Brake Pad INSPECTION 1. Check the pad thickness. NOTE: • Always replace the pads of both wheels and both sides as a set. • Replace pad clips if they are twisted or worn. •...
Rear Brake Pad INSTALLATION Rear Brake Pad INSTALLATION BRAKE > Rear Brake Pad INSTALLATION NOTE: Before installation, remove mud and foreign matter from the caliper body assembly and support - rear disc brake. 1. Before installation, check the brake pad. Rear Brake Pad...
Rear Brake Pad REMOVAL Rear Brake Pad REMOVAL BRAKE > Rear Brake Pad REMOVAL 1. Lift up the vehicle, and then remove the rear wheels. 2. Remove the rear brake pad. (1) Remove the bolts and remove the brake hose bracket. (2) Remove the caliper bolt, and...
Master Cylinder ASSEMBLY Master Cylinder ASSEMBLY BRAKE > Master Cylinder ASSEMBLY CAUTION: When replacing the reservoir tank, adhere the label to the position shown in the figure. (C0 model) Label: C5 model Part No. 25080GA010 (a) Label (b)...
Master Cylinder DISASSEMBLY Master Cylinder DISASSEMBLY BRAKE > Master Cylinder DISASSEMBLY 1. Remove the reservoir tank. CAUTION: Be careful not to tighten a vise excessively. (1) Place the master cylinder assembly between aluminum plates and fix it on a vise....
Master Cylinder INSTALLATION Master Cylinder INSTALLATION BRAKE > Master Cylinder INSTALLATION 1. Replace the seal sub assembly for the master cylinder assembly with a new part. CAUTION: Be careful not to install the seal sub assembly in the wrong location. (a)...
Master Cylinder REMOVAL Master Cylinder REMOVAL BRAKE > Master Cylinder REMOVAL CAUTION: Do not allow brake fluid to come in contact with the painted surface of the vehicle body. If it does, wash off with water and wipe away completely. 1. Disconnect the ground...
General Description COMPONENT General Description COMPONENT BRAKE > General Description COMPONENT 1. FRONT DISC BRAKE (1) Caliper body (9) Lock pin - front brake (silver) (16) Disc rotor (2) Bleeder - screw (10) Support - front disc brake...
Front Disc Rotor INSPECTION Front Disc Rotor INSPECTION BRAKE > Front Disc Rotor INSPECTION 1. DISC ROTOR RUNOUT CHECK 1. Check the hub unit COMPL - front axle for free play and runout before the inspection of disc rotor runout limit. Front Hub Unit Bearing > INSPECTION...
Front Disc Rotor REMOVAL Front Disc Rotor REMOVAL BRAKE > Front Disc Rotor REMOVAL 1. Lift up the vehicle, and then remove the front wheels. 2. Remove the caliper body assembly from the housing assembly - front axle. (1) Remove the bolt from the brake hose...
Front Disc Brake Assembly DISASSEMBLY Front Disc Brake Assembly DISASSEMBLY BRAKE > Front Disc Brake Assembly DISASSEMBLY CAUTION: Be careful not to allow foreign matter to enter the brake hose connector. 1. Remove mud and foreign matter from the caliper body. 2. Remove the piston -...