SUBARU impreza SERVICE and USER MANUAL

FRONT SUSPENSION

Sort by: default name
Wheel Alignment INSPECTION Wheel Alignment INSPECTION FRONT SUSPENSION > Wheel Alignment INSPECTION Check the following items before performing the wheel alignment measurement. • Tire inflation pressure • Uneven wear of RH and LH tires, or difference of...
General Description COMPONENT General Description COMPONENT FRONT SUSPENSION > General Description COMPONENT 1. FRONT SUSPENSION (1) Front crossmember COMPL (14) Bushing rear - front arm (27) Clip (2) Flange bolt (15) Stud bolt...
General Description PREPARATION TOOL General Description PREPARATION TOOL FRONT SUSPENSION > General Description PREPARATION TOOL 1. SPECIAL TOOL ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS 927680000 INSTALLER & REMOVER SET Used for replacing the bushing...
Front Strut ASSEMBLY Front Strut ASSEMBLY FRONT SUSPENSION > Front Strut ASSEMBLY 1. Before assembly, check each part. Front Strut > INSPECTION 2. Using a coil spring compressor, compress the coil spring - front. NOTE: Make sure that the vertical...
Front Strut DISASSEMBLY Front Strut DISASSEMBLY FRONT SUSPENSION > Front Strut DISASSEMBLY 1. Using a coil spring compressor, compress the coil spring - front. 2. Using the ST, remove the self-locking nut. PREPARATION TOOL: ST: STRUT MOUNT SOCKET (20399AG000)...
Front Strut DISPOSAL Front Strut DISPOSAL FRONT SUSPENSION > Front Strut DISPOSAL CAUTION: • Before handling struts, be sure to wear goggles to protect eyes from gas, oil and cutting powder. • Do not disassemble the strut damper or throw into...
Front Strut INSPECTION Front Strut INSPECTION FRONT SUSPENSION > Front Strut INSPECTION Check the removed part for wear, damage and cracks, and then repair or replace it if defective. 1. STRUT 1. Check for oil leaks. 2. Move the piston rod up and down to...
Front Strut REMOVAL Front Strut REMOVAL FRONT SUSPENSION > Front Strut REMOVAL 1. Lift up the vehicle, and then remove the front wheels. 2. Remove the front strut assembly. (1) Place an alignment mark (a) on the adjusting bolt and the strut. (2)...
Front Stabilizer INSTALLATION Front Stabilizer INSTALLATION FRONT SUSPENSION > Front Stabilizer INSTALLATION 1. Before installation, inspect the following items and replace any faulty part with a new one. • Check the bushing - stabilizer for abnormal cracks, fatigue or...
Front Stabilizer REMOVAL Front Stabilizer REMOVAL FRONT SUSPENSION > Front Stabilizer REMOVAL 1. Lift up the vehicle, and then remove the left and right front wheels. 2. Remove the bolts and clips, and remove the under cover - front. (1) Under cover...
Front Crossmember Support Plate INSTALLATION Front Crossmember Support Plate INSTALLATION FRONT SUSPENSION > Front Crossmember Support Plate INSTALLATION CAUTION: Install the under cover so that the under cover front end (b) comes inside of the bumper face - front (a). Install each part in the reverse...
Front Crossmember Support Plate REMOVAL Front Crossmember Support Plate REMOVAL FRONT SUSPENSION > Front Crossmember Support Plate REMOVAL 1. Lift up the vehicle. (1) Under cover - front (2) Mud guard - front (3) Plate cover - rear (XV model) 2. Remove the bolt,...
Front Crossmember INSTALLATION Front Crossmember INSTALLATION FRONT SUSPENSION > Front Crossmember INSTALLATION 1. Check the crossmember for damage or cracks, and correct or replace if defective. 2. Install the universal joint assembly - steering. Universal Joint >...
Front Crossmember REMOVAL Front Crossmember REMOVAL FRONT SUSPENSION > Front Crossmember REMOVAL CAUTION: • The power steering control module continues to operate after the engine stops and calculate the temperature in the control module. Therefore, before...
Front Ball Joint INSPECTION Front Ball Joint INSPECTION FRONT SUSPENSION > Front Ball Joint INSPECTION 1. Check that there is no play by moving the upper and lower portions of front tire in an axial direction with the brake pedal depressed. • Play exists. >...
Front Ball Joint INSTALLATION Front Ball Joint INSTALLATION FRONT SUSPENSION > Front Ball Joint INSTALLATION 1. Install the ball joint assembly to the housing assembly - front axle. CAUTION: • Do not apply grease to the tapered portion of ball stud. • Before...
Front Ball Joint REMOVAL Front Ball Joint REMOVAL FRONT SUSPENSION > Front Ball Joint REMOVAL 1. Lift up the vehicle, and then remove the front wheels. 2. Remove the bolts and clips, and remove the under cover - front. (1) Under cover - front (2)...
Front Arm ASSEMBLY Front Arm ASSEMBLY FRONT SUSPENSION > Front Arm ASSEMBLY 1. BUSHING FRONT - FRONT ARM 1. Before assembly, inspect the following items and replace any faulty part with a new one. • Check the front arm assembly for damage or...
Front Arm DISASSEMBLY Front Arm DISASSEMBLY FRONT SUSPENSION > Front Arm DISASSEMBLY 1. BUSHING FRONT - FRONT ARM 1. Put an alignment mark on the front arm assembly based on the split portion of the bushing intermediate plate of the busing front - front arm....
Front Arm INSTALLATION Front Arm INSTALLATION FRONT SUSPENSION > Front Arm INSTALLATION 1. Before installation, inspect the following items and replace any faulty part with a new one. • Check the front arm assembly for damage or cracks, and replace if...
Front Arm REMOVAL Front Arm REMOVAL FRONT SUSPENSION > Front Arm REMOVAL 1. Lift up the vehicle, and then remove the front wheels. 2. Remove the bolts and clips, and remove the under cover - front. (1) Under cover - front (2) Mud...
General Diagnostic Table INSPECTION FRONT SUSPENSION > General Diagnostic Table INSPECTION 1. IMPROPER VEHICLE POSTURE OR IMPROPER WHEEL ARCH HEIGHT Possible cause Corrective action (1) Permanent distortion or damage of the coil spring...
General Description CAUTION FRONT SUSPENSION > General Description CAUTION • Wear appropriate work clothing, including a helmet, protective goggles and protective shoes when performing any work. • Before removal, installation or...
Front Strut INSTALLATION FRONT SUSPENSION > Front Strut INSTALLATION 1. Install the strut mount - front at the upper side of the strut to the body, and tighten it with new flange nuts. Tightening torque: 20 N·m (2.04 kgf-m, 14.8...