SUBARU impreza SERVICE and USER MANUAL

Generator

Sort by: default name
Generator INSTALLATION Generator INSTALLATION STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Generator INSTALLATION 1. Temporarily install the generator bracket to the engine main body and tighten the bolts in the numerical order. Tightening torque: 36 N·m...
Generator ASSEMBLY Generator ASSEMBLY STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Generator ASSEMBLY Assemble in the reverse order of disassembly. NOTE: • Refer to component for tightening torque of each part. General Description > COMPONENT...
Generator DISASSEMBLY Generator DISASSEMBLY STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Generator DISASSEMBLY 1. Remove the cap from the generator. 2. Remove four bolts. 3. Use a drier to heat the rear cover (A) portion to 50 — 60 ° C...
Generator INSPECTION Generator INSPECTION STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Generator INSPECTION 1. DIODE CAUTION: There is the possibility of damaging the diodes if a mega-tester (used to measure high voltages) or a similar measuring instrument is...
Generator REMOVAL Generator REMOVAL STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Generator REMOVAL 1. Remove the V-belt covers. 2. Disconnect the ground cable from battery. 3. Remove the V-belts. V-belt > REMOVAL 4. Disconnect the...