SUBARU impreza SERVICE and USER MANUAL

Master Cylinder

Sort by: default name
Master Cylinder DISASSEMBLY Master Cylinder DISASSEMBLY CLUTCH SYSTEM > Master Cylinder DISASSEMBLY 1. Remove the straight pin and nipple. (A) Nipple (B) Straight pin 2. Remove the oil seal. (A) Oil seal 3. Move the...
Master Cylinder INSPECTION Master Cylinder INSPECTION CLUTCH SYSTEM > Master Cylinder INSPECTION If any damage, deformation, wear, swelling, rust or other faults are found on the cylinder, piston, push rod, nipple, return spring, bleeder screw, seat or hose, replace the faulty...
Master Cylinder INSTALLATION Master Cylinder INSTALLATION CLUTCH SYSTEM > Master Cylinder INSTALLATION 1. Install the master cylinder to the vehicle body, and connect the clutch pipe and tank hose. Tightening torque: T1: 15 N·m (1.5 kgf-m, 11.1 ft-lb) T2: 18...
Master Cylinder ASSEMBLY Master Cylinder ASSEMBLY CLUTCH SYSTEM > Master Cylinder ASSEMBLY 1. Apply a coat of grease to the contact surfaces of the push rod and piston before installation. Grease: SILICONE GREASE G-40M or equivalent 2. Assemble in the...
Master Cylinder REMOVAL Master Cylinder REMOVAL CLUTCH SYSTEM > Master Cylinder REMOVAL CAUTION: Be careful not to spill the brake fluid. Brake fluid spilled on the vehicle body will harm the paint surface; wash it off with water and wipe clean quickly if spilled....