SUBARU impreza SERVICE and USER MANUAL

PEDESTRIAN ALERT SYSTEM

Sort by: default name
Relay and Fuse LOCATION Relay and Fuse LOCATION PEDESTRIAN ALERT SYSTEM > Relay and Fuse LOCATION Relay & fuse box Fuse 10 A (pedestrian alert control unit) (A) NOTE: For other related fuses, refer to the wiring diagram. Power Supply Circuit
Pedestrian Alert Speaker REMOVAL Pedestrian Alert Speaker REMOVAL PEDESTRIAN ALERT SYSTEM > Pedestrian Alert Speaker REMOVAL 1. Disconnect the ground cable from battery. NOTE NOTE: For the 12 volt engine restart battery, disconnect the ground terminal from 12V engine restart...
Pedestrian Alert Control Unit REMOVAL Pedestrian Alert Control Unit REMOVAL PEDESTRIAN ALERT SYSTEM > Pedestrian Alert Control Unit REMOVAL 1. Disconnect the ground cable from battery. NOTE NOTE: For the 12 volt engine restart battery, disconnect the ground terminal from 12V engine restart...
General Description COMPONENT General Description COMPONENT PEDESTRIAN ALERT SYSTEM > General Description COMPONENT (1) Pedestrian alert speaker (2) Pedestrian alert control unit (1) Pedestrian alert warning light
General Description PREPARATION TOOL General Description PREPARATION TOOL PEDESTRIAN ALERT SYSTEM > General Description PREPARATION TOOL 1. SPECIAL TOOL ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS 1B022XU0 SUBARU SELECT MONITOR III KIT Used for setting of...
Pedestrian Alert Speaker INSTALLATION PEDESTRIAN ALERT SYSTEM > Pedestrian Alert Speaker INSTALLATION Install each part in the reverse order of removal. Tightening torque: Pedestrian alert speaker: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
Pedestrian Alert Control Unit INSTALLATION PEDESTRIAN ALERT SYSTEM > Pedestrian Alert Control Unit INSTALLATION Install each part in the reverse order of removal.
Relay and Fuse INSPECTION PEDESTRIAN ALERT SYSTEM > Relay and Fuse INSPECTION 1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the fuse is blown again, check the system...
General Description CAUTION PEDESTRIAN ALERT SYSTEM > General Description CAUTION • Before disassembling or reassembling parts, always disconnect the battery ground cable from battery. When replacing the audio, control module and other parts...
Pedestrian Alert System WIRING DIAGRAM PEDESTRIAN ALERT SYSTEM > Pedestrian Alert System WIRING DIAGRAM Refer to “Pedestrian Alert System” in the wiring diagram. Pedestrian Alert System > WIRING DIAGRAM
Stop Light Brake Switch NOTE PEDESTRIAN ALERT SYSTEM > Stop Light & Brake Switch NOTE For stop light and brake switch, refer to “BRAKE” section. Stop Light Switch > INSPECTION
Combination Meter NOTE PEDESTRIAN ALERT SYSTEM > Combination Meter NOTE For the combination meter, refer to “INSTRUMENTATION/DRIVER INFO” section. Combination Meter
Pedestrian Alert System INSPECTION PEDESTRIAN ALERT SYSTEM > Pedestrian Alert System INSPECTION Refer to “Basic Diagnostic Procedure” of “PEDESTRIAN ALERT SYSTEM (DIAGNOSTICS)” section. Basic Diagnostic Procedure
Diagnostics with Phenomenon INSPECTION PEDESTRIAN ALERT SYSTEM > Diagnostics with Phenomenon INSPECTION Refer to “Diagnostics with Phenomenon” of “PEDESTRIAN ALERT SYSTEM (DIAGNOSTICS)” section. Diagnostics with Phenomenon
Pedestrian Alert System NOTE PEDESTRIAN ALERT SYSTEM > Pedestrian Alert System NOTE For procedure of each component in the pedestrian alert system, refer to the respective section. • Pedestrian alert control unit: Pedestrian Alert Control...
Pedestrian Alert Speaker INSPECTION PEDESTRIAN ALERT SYSTEM > Pedestrian Alert Speaker INSPECTION Using the Subaru Select Monitor, perform the compulsory sound generation of the speaker. System Operation Check Mode When a malfunction is detected for the...