SUBARU impreza SERVICE and USER MANUAL

SPEED CONTROL SYSTEMS(H4DO(w-o HEV))

Sort by: default name
General Description COMPONENT General Description COMPONENT SPEED CONTROL SYSTEMS(H4DO(w/o HEV)) > General Description COMPONENT (1) Accelerator pedal ASSY (3) Accelerator plate Tightening torque: N·m (kgf-m, ft-lb) (2) Clip (4)...
General Description PREPARATION TOOL General Description PREPARATION TOOL SPEED CONTROL SYSTEMS(H4DO(w/o HEV)) > General Description PREPARATION TOOL 1. SPECIAL TOOL ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS 1B022XU0 SUBARU SELECT MONITOR III KIT Used for...
Accelerator Pedal INSPECTION Accelerator Pedal INSPECTION SPEED CONTROL SYSTEMS(H4DO(w/o HEV)) > Accelerator Pedal INSPECTION 1. CHECK ACCELERATOR PEDAL SENSOR AREA (METHOD WITH CIRCUIT TESTER) 1. Remove the glove box. Glove Box > REMOVAL 2. Turn the ignition switch...
Accelerator Pedal REMOVAL Accelerator Pedal REMOVAL SPEED CONTROL SYSTEMS(H4DO(w/o HEV)) > Accelerator Pedal REMOVAL 1. Disconnect the ground cable from battery. NOTE NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V...
General Description SPECIFICATION SPEED CONTROL SYSTEMS(H4DO(w/o HEV)) > General Description SPECIFICATION Accelerator pedal Stroke At pedal pad 50 — 59 mm (1.97 — 2.32 in)
Accelerator Pedal INSTALLATION SPEED CONTROL SYSTEMS(H4DO(w/o HEV)) > Accelerator Pedal INSTALLATION Install in the reverse order of removal. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
Accelerator Pedal DISASSEMBLY SPEED CONTROL SYSTEMS(H4DO(w/o HEV)) > Accelerator Pedal DISASSEMBLY NOTE: The accelerator pedal cannot be disassembled.
General Description CAUTION SPEED CONTROL SYSTEMS(H4DO(w/o HEV)) > General Description CAUTION • Prior to starting work, pay special attention to the following: 1. Always wear work clothes, a work cap, and protective shoes. Additionally,...