SUBARU impreza SERVICE and USER MANUAL

Starter

Sort by: default name
Starter INSPECTION Starter INSPECTION STARTING/CHARGING SYSTEMS(H4DO(HEV)) > Starter INSPECTION 1. ARMATURE 1. Check the commutator for signs of seizure or stepped wear caused by roughness of the surface. If there is light wear, use sandpaper to repair....
Starter INSTALLATION Starter INSTALLATION STARTING/CHARGING SYSTEMS(H4DO(HEV)) > Starter INSTALLATION Install in the reverse order of removal. Tightening torque: T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb) T2: 11 N·m (1.1 kgf-m, 8.1 ft-lb)
Starter DISASSEMBLY Starter DISASSEMBLY STARTING/CHARGING SYSTEMS(H4DO(HEV)) > Starter DISASSEMBLY 1. Disconnect the terminal M from the magnet switch assembly. 2. Remove the magnet switch assembly from the starter housing assembly. 3....
Starter REMOVAL Starter REMOVAL STARTING/CHARGING SYSTEMS(H4DO(HEV)) > Starter REMOVAL 1. Disconnect the ground cable from battery. NOTE NOTE: For the 12 volt engine restart battery, disconnect the ground terminal from 12V engine restart battery...
Starter ASSEMBLY STARTING/CHARGING SYSTEMS(H4DO(HEV)) > Starter ASSEMBLY 1. Apply grease to the shaft sliding surfaces of the internal gear assembly. Grease: Multemp #6129 or equivalent 2. Assemble the shaft to the internal...