SUBARU impreza SERVICE and USER MANUAL

Starter

Sort by: default name
Starter INSPECTION Starter INSPECTION STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Starter INSPECTION 1. ARMATURE 1. Check the commutator for signs of seizure or stepped wear caused by roughness of the surface. If there is light wear, use sandpaper to...
Starter INSTALLATION Starter INSTALLATION STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Starter INSTALLATION Install in the reverse order of removal. NOTE: For CVT model, a nut is used at (A). Tightening torque: 50 N·m (5.1 kgf-m, 36.9 ft-lb)...
Starter DISASSEMBLY Starter DISASSEMBLY STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Starter DISASSEMBLY 1. Disconnect the terminal M from the magnet switch assembly. 2. Remove the magnet switch assembly from the starter housing assembly. 3....
Starter REMOVAL Starter REMOVAL STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Starter REMOVAL 1. Disconnect the ground cable from battery. 2. Remove the clip (A) from the air intake boot. 3. Loosen the clamp (B) securing the air cleaner...
Starter ASSEMBLY STARTING/CHARGING SYSTEMS(H4DO(w/o HEV)) > Starter ASSEMBLY 1. Apply grease to the shaft sliding surfaces of the internal gear assembly. Grease: Multemp #6129 or equivalent 2. Assemble the shaft to the...